- Dieses Thema hat 529 Antworten sowie 34 Teilnehmer und wurde zuletzt vor vor 1 Woche von
aktualisiert.
-
Beiträge
-
Hallo zusammen,
It has been a while, but I finally got some time to try and improve my setup. After some tedious back and forth with the help of AI I managed to prolong the listening sessions, however today I started to get some brief drop-outs and then out of sudden lost of connectivity with the TL-WR902AC. AI says that after all modifications on the OpenWRT side it could be that under load the power supply can’t sustain this specific radio’s current draw over time, which is at 15 dBm at the moment, given my home configuration.
Has anybody experienced something similar or might have any useful suggestions?
Thanks in advance.
All the best,
BrunoHello Eric,
It is the 100Base-TX as with my setup I cannot use the 10Base-T.
As of now, after countless hours, I have tried the WR902AC at 2.4GHz with different dBm, with and without a WR802N as an access point, the WR902AC at 5GHz and in every single case I have had the same issue: the box suddenly hangs. The only constant along all these different settings has been the 3.3V PSU.
Perhaps my particular environment is too harsh for this kind of tweak and I should just forget about this whole endeavor…
All the best,
BrunoHello everyone,
Dear happy WR902AC user, Does anyone use a switch between the WR902AC and the streamer?
Best,
Olivier
Hallo zusammen,
Well, a little over a month later, a new TL-WR902AC and quite a few hours of testing configuration settings with the assistance of Claude allowed me to set-up a stable WiFi connection for my system to sit down and enjoy it.
The new TL-WR902AC connects to my router and does all the heavy lifting (using the same minimal image but on its stock power supply) whereas the modified one just feeds my streamer.
I am still in the discovering stages of this new setup, but I think the sound is more nuanced and I can hear new details.
All the best,
Bruno
- Du musst angemeldet sein, um auf dieses Thema antworten zu können.