Update regarding the sound of the Drossel V3:
As some might remember I thought the sound of the V3 was a little thin…
Today I had the time to experiment a little. My favorite LAN cable is the Curious Cable. So I put that instead of the V3, and voila I had all the low end back.
So I put in the V3 in the chain, better, but not what I had hoped. Then I remembered the LRS01-E1000/POE I use for all earthing of my switches, and BANG the low end is back, together with the openness of the V3.
I then exchanged the LRS01 with the Delock – bad luck, the sound got messed up, not precise and music floating everywhere. Back in with the LRS01-E1000/POE and all is perfect.
And even better with the Stack Audio Regenerator!
So the absolute best result in my humble home is:
TP Link 902 Router (powered by Allo Shanti LPSU) ->Drossel V3 ->LRS01-E1000/POE ->Curious Cable->Stack Audio Regenerator ->Synergistic Foundation LAN cable ->WiimPro (also fed from Allo Shanti LPSU) ->Lyngdorf TDAI1120 (with Synergistic Foundation power cable and Stack AUVA EQ feet) ->GoldenEar Triton Three+ (on Stack 100´s) . This combination kills it all.
Have a nice week end everyone
And below a picture of the before mentioned LRS01-E1000/POE
KnockKnock