Hi Eric,
I have earth on all 3 switches, done by these small boxes (picture). The LAN signal does not go through them, I only connected one unused output from the switch to the „box“, and from there on to the earth connector on my Allo Shanti and to my earth plug (real earth all the way to the meter). This way I have made earth.
I did not do it on my Stack Regenerator and WiiM Pro as there is no extra unused output. So I will let the LAN signal go though these boxes and connect then to earth that way. The DrosselV3 will be connected just before the WiiM Pro, which is my primary streamer (sounds way better than my Lyngdorf streaming amp, and no it´s not on WiFi but cabled. And from there with a QED Reference Quartz Optical cable, WOW!!! I NEVER thought that an optical cable could make a difference. And its better than coax digital).
As I now have 5 earth cables connected, I´d look for a way to connect them all. Right now I have just twisted them together, but I would like to have a better way to connect these 5 rings (the end of the cable – picture). Any ideas how to do that? Buy some kind of box (what box – link?), or some heavy copper screw and nut and just tie it together?
I have again tested the 902 WLAN, and I understand why people like the sound of this. It´s the openness that so great, and I like that too. I just miss the bass, meaning the way the sound pushes towards, like a wave. It´s a bit too thin in my opinion. But I really understand why you guys like it. And of course I can just adjust the low levels a bit on my amp. I also just shortly tried my Allo Shanto vs the powerbank, and there was no big difference at first listen. Not as big as the difference when I changed the input of the WiiM Pro to the Shanti, holy cow that is goooood….
So any good ideas how to make a good earth wiring system???
Best KnockKnock 